PE/PVC large diameter double wall courrgated pipe extrusion production line
Production introdustion
PE / PVC double wall corrugated pipe is a new type of plastic pipe with circular corrugated outer wall and smooth inner wall structure. Due to its excellent pipe wall structure design, compared with other special-shaped wall pipes, its weight is much lower than flat wall pipe or concrete pipe under the same ring steel degree. Moreover, the connection and construction are convenient, the cost of pipe material is greatly reduced, and the market competitiveness of pipe is increased. It has been widely popularized and applied in foreign countries, and has replaced the traditional concrete pipes and other structural wall pipes.
Application fields
It was widely used in municipal drainage, sewage engineering, irrigation, water conveyance, drainage engineering, communication network engineering, chemical industry, mine fluid transportation and other fields.
Features
The PE / PVC large diameter double wall corrugated pipe production line is a special plastic industrial processing equipment for large diameter double wall corrugated pipe with domestic leading level, which is based on years of experience in producing corrugated pipe equipment and absorbing the most advanced foreign technology and manufacturing process. The whole line adopts human-computer interface control, humanized design, high level automation, easy to operation and control,stable operation
Mian technology parameter | |||
Mould |
JG-SBG630 |
JG-SBG800 | |
Material |
|
PVC |
PE |
Extrusion system | |||
screw diameter |
mm |
Φ92/188 |
Φ90/120 |
L/D |
L/D |
|
30:1 |
Drive power |
kw |
90 |
75/135 |
Heating power |
kw |
77 |
120 |
Heating section |
|
8 |
6×2 |
Pipe molding system | |||
mould quantity |
|
42 |
42 |
Drive power |
kw |
7.5 |
7.5 |
Cooling power |
kw |
11 |
11 |
Lubricating power |
kw |
0.75 |
0.75 |
Module running speed |
m/min |
0.3-3 |
0.3-3 |
Vacumm pump power |
kw |
75 |
75 |
Effective contact length of module |
mm |
2286 |
2286 |
spray cooling system | |||
Cooling method |
|
water cooling ,air cooling | |
Cooling power |
kw |
9.5 |
9.5 |
Automatic cutting system | |||
Drive gross power |
kw |
10.4 |
10.4 |
Cutting method |
|
planetary | |
Cutting range |
mm |
Φ200-630 |
Φ225-800 |
Other technology parameter | |||
Pipe diameter range |
mm |
Φ200-630 |
Φ225-800 |
height of center |
mm |
1600 |
1600 |
Water consumption |
L/H |
6000 |
6000 |
Installed capacity |
kw |
460 |
550 |
Normal power |
kw |
300 |
350 |
Overall dimension (length x width x height) |
mm |
39700×5200×5850 | |
Total weight |
T |
42 |
45 |